Luxusheat Multi-layer 16x2.00mm Pipe
Heatmiser Slimline-RF Kit
The Heatmiser Slimline-RF Kit comprises of a Heatmiser Slimline-RF Multi Mode Thermostat and RF-Switch wireless receiver. The receiver is hard wired to the boiler, so is normally positioned next to the boiler or you could use the existing thermostat cabling. The wireless thermostat is then wall mounted within range of the receiver (up to 100 meters open space).
The RF Switch is a 2 Channel Receiver providing 2 changeover contacts, 1 for the heating circuit and 1 for the hot water circuit. In addition, the RF Switch provides a volt free switch for the boiler. The RF Switch can be paired to the UH8-RF to provide a wireless link for the boiler signal.
Multi Mode: Can be setup to work in one of three modes;
Non Programmable Thermostat
Programmable Thermostat with Hot Water Output